Tools / Adhesives / Lubricates

Reference: 11/0

Allen key set, 7-part

Allen key set, extra-length, with ball-end. Contains all sizes for mechanics, including imperial Allen key for damaged grubscrews.

Reference: 11/39

Fine-point screwdriver set

The fine point screwdriver set contains 6 selected socket spanners for 12 different applications: for M 3 and M 4 grubscrews, M 3 and M 4 socket-head cap screws (with ball-shaped head each), and for large and small slot-head scews; all together with a ball-link driver (4 mm connection), a handy grip and a tool bag. Insert the required socket spanner to...

Reference: 10/4

Collective pitch adjustment jig

Reference: 11/15

Pocket Allen key set

This practical pocket-sized tool contains a set of fold out Allen keys in exactly the sizes you need when working on model helicopters. The set is compact and handy, all the keys are ready to use at any time, and the small keys will not longer disappear whenever you glance away. The pocket Allen key set is ideal for use at the flying site.  Pocket Allen...

Reference: 10/41

Digital collective pitch adjustment jig

Not available

Reference: 11/30

Rotor head setting-up tools

Rotor head setting-up tools for the main rotor blades, incl. caseYou "Old hands" at the helicopter game know all about the essential setting-up aids, and have done so for years, but if you are a beginner, you may only just be finding out about them. One essential aid is a set of setting-up tools for the main rotor.Whenever you need to set blade pitch,...

Reference: 68/17

Swashplate jig

Use this swashplate jig to adjust the pushrods of the X-Treme, X-PERIENCE, XLV and Robinson R22 mechanics.

Reference: 11/35

Tool case set

We strongly recommend that when you begin assembling your first helicopter you use the correct combination of tools right from the start. This tool case includes Allen keys for grubscrews from M 3 to M 5, a straight-point screwdriver, a cross-point screwdriver, M 3 and M 4 box spanners and thread-lock fluid. The ball-link driver fits into the small box...

Reference: 68/4

Swashplate jig

The pushrods from the swashplate to the rotor head must be set to identical lengths.Just slip the swashplate jig under the swashplate, and the swashplate will automatically be set parallel to the dome plate and at right-angles to the rotor shaft. You can now set up all your linkages with confidence.

Reference: 11/85

Pushrod calipers

Model helicopter building instructions always state pushrod length as measured from ball centre to ball centre.Determining this dimension using conventional measuring tools is not really much more accurate than estimating the length.complete with measuring holders

Reference: 111/10

complete socket spanner set

The kit contains:Ord.No. 111/11   telescope armOrd.No. 111/12   Phillips PH2Ord.No. 111/13   Phillips PH1Ord.No. 111/14   SW 3.0Ord.No. 111/15   SW 4.0Ord.No. 111/16   SW 5.0Ord.No. 111/17   SW 6.0

Reference: 79/1

Flybar spirit level

To adjust the pitch of the main rotor blades accurately it is essential to set the flybar exactly horizontal. This is done by simply hanging a spirit level from the flybar. But make sure that the helicopter is standing on a level surface before you start!