Schlauch für Methanol 1 m

Reference: 3725

Kraftstoffbehälter 2,5 Liter Tank

Reference: 412/26

Fuel tank for Kerosene 2 l for Bell 412

dimensions: approx. 38.5 x 18 x 4.5 cm (height of the nose: 9 cm)

Reference: 3741

Separate pump holder and hand wind pump

Separate pump holder and hand wind pump, suitable for fitting to the 10 L fuel container.

Reference: 791/26

Kerosin Tank 1.5 l, Turbine Cobra

Kerosene Tank 1.5 l, GRP, with accessories, for Cobra with Turbine

Reference: 26/5

Tank for Kerosene 1.25 l

Tank for Kerosene, 1250 ml, 2 x required for the Lama

Reference: 302/26

Fuel tank for Kerosin 1,5 l

Fuel tank for Kerosin 1,5 l

Reference: 605/26

Kerosene Tank 3.3 l, Turbine BO 105

Kerosene Tank 3.3 l, GRP, with accessories, for BO 105 with Turbine.

Reference: 3720

Filling station for petrol 3 l capacity

This refuelling station for petrol helicopters consists of a petrol-proof container of 3 litres capacity, a hand-pump for filling and emptying, fittings and filler hose.

Reference: 26/12

Tankpendel 2 x 4 mm für Methanol

Reference: 206/26

Kerosene Tank 2.2 l, Turbine UH-1D

Kerosene Tank 2.2 l, GRP, with accessories, for UH-1D with Turbine

Reference: 830/27

Tank 540 ml for kerosene

Tank 540 ml, kerosene-resistantincluding accessories complying the special request of the contact with keroseneThe CofG of a model helicopter should only be checked with an empty fuel tank.During the flight the fuel is situated in a place where the additional weight does not have an adverse effect. If you set the CofG with a full fuel tank the resultant...

Reference: 26/60

Kevlartank para Queroseno 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all pressure tested to make sure that they are 100% leak-proof when they arrive at your workshop.When ordering, one tank is supplied.When mounting the lid, please fix the screws cross-wise using blue loctite until you have...

Reference: 830/24

Fuel tank nipple with bend, M5

Fuel tank nipple with bend, M5.Content of the package: 2 pieces

Reference: 26/32

Schlauchsicherung für Methanol

Reference: 26/34

Petrol / kerosene hose clamp

Fuel tubing is required to withstand many kinds of thermal and chemical stress, i.e. it has to be resistant to petrol and kerosene whilst maintaining maximum flexibility. However, it must also be possible to fix the tubing reliably to tubes and nipples; the more valuable the model, the more important it becomes to fix the fuel tubing with absolute...

Reference: 26/70

Kevlartank for Kerosene 1.4 l

Aramid is a fibre that is used in motor racing. The tanks have an even surface inside and rough on the outside.These fuel tanks are all tested with air pressure on leaks to make sure that they are 100% leak-proof, when they arrive at your workshop. They fit in the Vario turbine Ecureuil fuselage, that we recommend the plastic tank Ord.No. 26/7 for.When...