Anlaßverlängerung mit 4-Kant

Reference: 16/1

Heat-resistant matt black spray paint

This heat-resistant matt black spray paint is suitable for use on silencers, exhaust manifolds and turbine exhaust pipes. The paint is temperature-resistant to 600° C; even more importantly: it...

Reference: 115/11

PTFE pipe 20 x 2.5 x 100 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 67/48

Starter cone

Component part for starter adaptor 67/41, 67/42 or 67/43.

Reference: 871/35

Blind hub, driven tail rotor R.H.

 Content of the package1 piece

Reference: 28/11

Silicone cable for glowplug lead

Silicon cable for glow plug connector; it's highly flexible, exellent suited for use as glow plug connetor cable. Content: approx. 1 m

Reference: 870/45

Bush set X-Treme mechanics LH

 Content of the package4 x 16.8 mm4 x 27.9 mm4 x 33.5 mm

Reference: 244505

Zylinderkopfdichtung R50 8,5ccOrd.No. 244505

Reference: 7/68

Startadapter, GFK

Reference: 67/44

Nut, M 8

 Content of the package1 piece

Reference: 116/17

Flex hose screw fittings set

  Content of the package complete as shown

Reference: 870/44

Distanzhülsen X-Treme Mechanik

Reference: 830/25

Flexschlauch für Kühlluftführung

Reference: 1020/20

Crankshaft nut 1/4" 28 UNF

 Content of the package1 piece

Reference: 115/5

PTFE pipe 20 x 2.5 x 120 mm

Manifolds and tuned pipes or silencers must be installed without touching each other, because the contact of these metal parts could cause radio interference. We can refer to this interference as "electric noise". The connection by PTFE pipe enables the required distance of 10 - 15 mm in the prescribed position, and it steadily seals gas-tight. This...

Reference: 67/42

Starter adaptor for M 8 crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 8 mm crankshaft threade.g. at Rossi engines

Reference: 67/41

Starter adaptor for 5/16" crankshaft

Because a fan for radial fan housing is "missing" the cone to attach the starter you use a starter adaptor whose nut provides an appropriate internal thread for the crankshaft.Starter adaptorfor 5/16" -24 UNF crankshaft threade.g. at Webra P5 and 4-stroke engines